Top 4 Bathroom Extractor fan UK – Indoor Lighting

As an Amazon Associate I earn from qualifying purchases.

1. neverest


Neverest RK 100 mm In-line Backdraught Shutter Vent for Extractor Fans with Foam Sealed

neverest #ad - Backdraft nominal width 100 mm 4 inch exact dimensions see drawing, Galvanized steel housing, Back draught valve for insertion into ventilation pipes, Flap leaves made of aluminum, Axis and spring made of stainless steel, Reduces noise due to internal rubber seal.

Here, the flap is installed so that the damper blades open only in the outflowing air direction. It has a smooth-running spring and should therefore be installed horizontally or vertically only as an exhaust air flap. This means that no cold air / wind can penetrate from outside through the ventilation duct. Installation: the backflow flap is installed by inserting it into the ventilation pipe until it stops.

Backflow flaps prevent the ingress of cold air or wind through the ventilation pipe. The inner sound insulation strip prevents loud rattling when striking the damper blades. The backflow flap rk opens and closes automatically. The position of the spring should be horizontal for horizontal installation of the flap so that it can open and close optimally. The damper blades open even at low air flow.
Brandneverest #ad
Manufacturerneverest #ad
Height10 cm (3.94 Inches)
Length8.8 cm (3.46 Inches)
Weight0.15 kg (0.33 Pounds)
Width10 cm (3.94 Inches)
Part Number4054503005303

2. BG Electrical


BG Electrical 815 Nexus White Triple Pole Fan Isolated Switch 10AX

BG Electrical #ad - Backed out captive screws for easy installation. The subtle design will blend with any décor - suitable for domestic or commercial installations. Stylish modern profile. Bg's nexus range of plate switches have been designed to perform at 10AX inductive loads. 10 amp, 10ax inductive rated.
BrandBG Electrical #ad
ManufacturerBG Electrical #ad
Height2.9 cm (1.14 Inches)
Length9.19 cm (3.62 Inches)
Width9.19 cm (3.62 Inches)
Part Number815

3. Manrose


Manrose FLAT100T Extractor fan with Timer for 4"/100mm duct

Manrose #ad - Single speed axial fan with electronic over-run timer – up to 30 mins and integral backdraught shutters. Panel or Wall mounting. Dimensions 159mm h x 159mm w x 70mm D - 15mm visible on the ceiling. Slim low profile projection.
BrandManrose #ad
ManufacturerManrose #ad
Part NumberFLAT100T

4. Merriway


Merriway BH00637 SES Appliance Lamp Tubular Shape for Cooker Hood Twin Pack, 40 W, 240 V, packs of 2 bulbs 4 in total

Merriway #ad - Manufacturer: Merriway? . Each lamp is individually Tested Before Packing. If instructions for fixing, assembly or maintenance of the products are included in the packaging then please ensure that they are followed. Packs of 2 bulbs 4 in total.
BrandMerriway #ad
ManufacturerBulk Hardware Ltd #ad
Height13 cm (5.12 Inches)
Length13 cm (5.12 Inches)
Width8 cm (3.15 Inches)
Part NumberBH00637